top of page
Specs:
Temp. Interface: LCD Touch Screen
Temp. Accuracy: ± 1.8°F / 1°C
Heating Curves: 30 steps
Max. Temperature: 3092°F / 1700°C
Working Temperature: 2912°F / 1600°C
Chamber Size: 4.7 x 4.7 x 5.1 in / 120 x 120 130 mm
Heating Rate: 0-68°F / 0°-20°C per min
Power: 2kw
Gross Weight: 220.4 lbs / 100kg
SDS F100
Air Compressor included.
The SDS P100 is a smart programmable dental ceramic furnace equipped with an automatic open and close tray design. It is suitable for all kinds of ceramic materials, including lithium disilicate, ceramic powder-based materials, and zirconia.
Features:
• Large touch screen interface for easy operation with panoramic display.
• Quartz technology ensures application of a uniform temperature field and long service life.
• An engineered lightweight thermal insulation material preserves heat and ensures minimal temperature fluctuations.
• Precise heat controls guarantee temperatures within an accuracy of +/- °1C / 1.8°F.
• Maintenance free, Imported oil-less vacuum pump with a high PSI limit with high flow.
• Night function settings.
• Temperature calibration settings.
• Easy operation, low noise, suitable for all laboratories.
Specs:
Voltage: 220V / 50Hz
Power: 1500W
Working Temperature Accuracy: +/- °1C (1.8°F)
Maximum Temperature: 1300 °C (2372 °F)
Maximum Vacuum: -98 Kpa / -14.21 PSI
Heating Rate: 0-140°C/min (0-284°F/min)
Display mode: Touch Screen Interface
Chamber Size: 10cm circumference x 7cm height
(3.93in circumference x 2.75in tall)
Packing Size: 48cm L x 36cm W x 66cm H
(18.8in L x 14.1in W x 26in H)
Weight: 29kg (63.9lbs)
SDS Smart Programmbale Porcelain Furnace
SDS Smart Programmbale Sintering Furnace
SDS P100
Features:
• 7 inch touchscreen for easy operation.
• Overheat alarm function.
• Pure MoSi2 rods to avoid denture contamination.
• Large capacity, double layers can sinter simultaneously.
• Gas outlet hole on top-side chamber.
• Multi-language display.
bottom of page